Manufacturing process of spherical LED display

The outdoor spherical LED display is an unconventional product, and it is the focus of popularity no matter where it is. In production, what is special about the LED spherical screen?

How to make LED spherical screen:

1. For outdoor spherical LED screens with larger diameters, a single-pixel tube can be used. Cut the ball according to the latitude, and place a row of LED pixel tubes in each latitude.

2. For indoor spherical led displays with smaller diameters, you can use surface mount three-in-one led lights, use flexible PCB boards to make point-by-point controllable light strips, and then the light strips, like the first form, surround the sphere according to the latitude.

3. For indoor screens, special led unit boards can also be designed according to the dot spacing. The special-shaped unit board can be designed as a triangle for splicing, or it can be designed into a 6-sided shape for splicing (just like making a football, it is composed of multiple 6-sided shapes). The models of indoor LED spherical displays are: P4, P5, P6, Various models such as P10 are available.

No matter which way the spherical LED display is made, a special LED display control system is required, and special-shaped processing and snapshot processing are required in the control. Therefore, the cost of spherical LED display is much higher than that of ordinary display.

 

Resolution Design of Spherical LED Display

INDOOR LED SCREEN
INDOOR FINE PITCH
_tmp_jZqb2B2BAJM888P8MVcFAQOZ4 (1)
INDOOR ULTRA SLIM
1000x1000led display
OUTDOOR FRONT SERVICE
RENTAL LED DISPLAY5
OUTDOOR 3D DISPLAY
INDOOR LED RENTAL DISPLAY2
INDOOR RENTAL
OUTDOOR LED RENTAL DISPLAY800
OUTDOOR RENTAL
RENTAL LED DISPLAY
RENTAL LED FLOOR
indoor led floor two
FIXED LED FLOOR
TRANSPARENT LED DISPLAY2
FLEXIBLE LED MESH