How to install and debug outdoor LED advertising screen

In order to use outdoor billboards well, installation and debugging are essential. For technical construction personnel, knowing the skills of outdoor construction and maintenance of advertising screens will effectively promote the promotion of business advertising and information dissemination, and it is also necessary for technical construction personnel to be familiar with Specifically, there are four steps in the installation of outdoor billboard LED electronic displays: site investigation, equipment construction, installation, and commissioning.

First of all, we have to conduct a field survey according to the actual situation

Specifically, before the outdoor LED display is installed, it should be tested according to the specific environment, topography, luminous radiation range, brightness acceptability and other parameters. The commander implements a unified hoisting plan to ensure that the equipment can be used normally and stably. Different situations are treated differently, so as to adopt a more appropriate method.

Secondly, after determining the specific plan according to the results of the on-site investigation, we will build the LED equipment.

For some outdoor LED billboards, it is necessary to distinguish between wall advertising screens, hanging advertising screens and roof advertising screens. During the actual installation, cranes and hoists should be used for segmented hoisting according to the distance and height, and at the same time, the above personnel should cooperate with each other. There is a better installation and use process for the LED advertising screen for high-altitude operation. During the construction process, safety and refined operation are the first requirements.

Once again, the construction is completed. In order to achieve the best transmission effect, we also need to debug the luminous radiation range.

Due to the different radiation ranges, the viewing angles of the LED display screens are also different. The fixed installation work of the outdoor LED display screens should be carried out according to the field acceptance ability and your usual viewing angle range, so as to ensure that the normal and brightness can be seen from every angle from a distance. Balanced images, subtitle information, large viewing angle and appropriate brightness can maximize benefits.

Finally, in order to deliver it smoothly, we need to carry out follow-up inspection and maintenance.

Subsequent testing includes many areas, such as LED display waterproofing, heat dissipation layer, LED display waterproof coating, rain shielding area on the display screen, heat dissipation space on both sides, power supply line, etc. These basic components constitute the entire stability. Good graphic LED display. Of course, later technical maintenance is also very important. We need to carry out unified management and maintenance for these parts. When the product is rusted, unstable or damaged, it needs to be replaced in time to ensure the safe use of the entire display.

INDOOR LED SCREEN
INDOOR FINE PITCH
_tmp_jZqb2B2BAJM888P8MVcFAQOZ4 (1)
INDOOR ULTRA SLIM
1000x1000led display
OUTDOOR FRONT SERVICE
RENTAL LED DISPLAY5
OUTDOOR 3D DISPLAY
INDOOR LED RENTAL DISPLAY2
INDOOR RENTAL
OUTDOOR LED RENTAL DISPLAY800
OUTDOOR RENTAL
RENTAL LED DISPLAY
RENTAL LED FLOOR
indoor led floor two
FIXED LED FLOOR
TRANSPARENT LED DISPLAY2
FLEXIBLE LED MESH