How to choose cooling equipment for LED full color display?

In the process of using the LED full-color display, the overall power is relatively large, especially for the large LED screen, the power is even higher. Fire safety hazards caused by heat dissipation problems are also worthy of vigilance. At the same time, good heat dissipation can also help prolong the service life of the screen. For the selection of cooling equipment for LED full-color displays of different areas, you can refer to the following:

1. LED full-color display within 30 square meters

For the areas north of Guangdong Province, because there will be no very hot weather, it is recommended not to use air conditioners. If conditions permit, two small fans are enough.

2. Full-color display screen with an area of ​​more than 30 square meters

(1) If the display screen is installed against the wall, first determine how much the display screen protrudes. If it protrudes from the wall by one meter, it is recommended to select the fan according to the size of the area. The fan installation positions are arranged in sequence above the side of the screen. For example, a customer has customized a 50-square-meter P16 outdoor full-color LED display in Lianchengfa. You can consider installing 4 axial fans with a diameter of about 600mm. The fans are the ones that pump air to the outside. The fan outlet on the board is equipped with aluminum alloy shutters.

(2)If the LED display is installed on a column, a fan is used to dissipate heat. The fan is installed on the aluminum-plastic panel on the back of the large screen, and it is best to lean up. If it is a double-column, open several shutters in the middle of the double-column as an air inlet, and the fan above is an exhaust port, forming a complete air convection, so that the heat dissipation effect is better.

(3)If the display screen is installed on the wall, the air conditioner can be installed, but the purchase cost and use cost will increase, and the heat dissipation effect will be worse than that of the fan. In addition, to install an air conditioner, it is necessary to ensure that the main unit of the air conditioner has a place to place it, so as not to affect the overall appearance of the wall. Generally, the most used air conditioners are 1.5P, 2P and 3P air conditioners. The northern cities are calculated according to 10 square meters of 1P air conditioners; the southern cities are calculated by 8 square meters of 1P air conditioners. If the area of ​​the LED outdoor display screen is really large, more than 100 square meters, the air conditioner will be directly customized by the manufacturer. If the area is not large, you can go to the specialty store to buy it, but the air conditioner must have the function of compensation for incoming calls.

The above is about the selection of heat dissipation equipment for LED full-color display. Considering the area of ​​the screen, the weather and climate of the installation location, and the installation method, the heat dissipation problem can be better solved, thereby eliminating potential safety hazards and ensuring the stable use and life of the display. 

INDOOR LED SCREEN
INDOOR FINE PITCH
_tmp_jZqb2B2BAJM888P8MVcFAQOZ4 (1)
INDOOR ULTRA SLIM
1000x1000led display
OUTDOOR FRONT SERVICE
RENTAL LED DISPLAY5
OUTDOOR 3D DISPLAY
INDOOR LED RENTAL DISPLAY2
INDOOR RENTAL
OUTDOOR LED RENTAL DISPLAY800
OUTDOOR RENTAL
RENTAL LED DISPLAY
RENTAL LED FLOOR
indoor led floor two
FIXED LED FLOOR
TRANSPARENT LED DISPLAY2
FLEXIBLE LED MESH